Home > MOTORSPORT > Braking > Pedal Boxes
Part Number: OBP0002PR
OBP Pro-Race, V2 floor mounted, bulkhead fit, hydraulic clutch pedal box assembly. Version 2 model of the OBP floor mounted pedalbox kit, now with all solid billet aluminium pedals and designed for vehicles with a hydraulic clutch. Now weighs in at 2.6kg (without cylinders) and features all oil impregnated pivot bushes for virtually maintainance free, smooth running operation.
The Pro-Race pedal box utilises a bias bar assembly, which with twin brake master cylinders, enables a fully adjustable bias braking system. With it's universal design, it can be used in a whole range of vehicles. This pedal box is floor mounted and combines brake, clutch and accelerator as an all in one unit. The pedal box is designed to butt up against a bulkhead and relies on this to gain some of it's strength. If you're not mounting hard up against a bulkhead, please also select the strength plate (OBP0099PR) to be assembled with the kit.
Supplied here as a bare pedal box or as a kit with the choice of associated components. All parts are available separately if you don't wish to buy them all at the outset. Clutch pedal includes pedal stop to prevent over stroking and a spring loaded accelerator pedal to improve throttle shut off. Also features adjustable pedal height (20mm) through these billet pedal with moveable foot plates. Features a 5:1 pedal ratio, with approx dimensions: Width 260mm, Pedal Height 280mm, Box Depth 140mm, Total Depth (including master cylinders) 250mm.
OBP 0.625 Non-Integral Master Cylinder OBPCB002£27.69
OBP 0.700 Non-Integral Master Cylinder OBPCB001£27.69
OBP 0.750 Non-Integral Master Cylinder OBPCB003£27.69
OBP Remote Cable Bias Bar Adjuster OBPCB009£27.95
OBP Standard Height Brake Fluid Reservoir£9.86
St/St Braided Feed Hoses 620mm Long 7/16th UNF Male fitting and 7/16th UNF Female£16.84