Home > MOTORSPORT > Braking > General Braking
Part Number: OBPCAP01Type: Fuel Filler NeckSize: To suit 40mm hoseCustoms Type: Alloy Cap and SleeveManufactured In: United KingdomUse: AutomotiveBrand: Optimum Balance ProductsMain Colour: SilverFeatures: Shaped Unscrewable Cap
OBP fuel filler neck with natural aluminium cap with a rubber o-ring seal. These necks can either be welded into a fuel tank or pushed into a 40mm ID fuel hose to mount a remote filling point for a fuel, water, oil or other fluid tank. You could weld a bracket onto the tube to enable it to be mounted anywher desired and run a hose down to the tank, alternatively drilled and slotted directlty into an aluminium tank and welded into place. Manufactured from 6061 grade aluminium for good strength and welding properties. M50 X 2 thread.